If routine checks and maintenance procedures are not done, the equipment could overturn and/or become a hazard.

Check surfacing material and replenish as necessary to maintain proper depth (see page 7).

Rake surfacing periodically to prevent compaction and maintain appropriate depths.

Remove any tripping hazards, such as exposed concrete footings, tree stumps, or rocks.

Check all nuts and bolts twice monthly during the usage season for tightness and tighten as required. It is particularly important that this procedure be followed at the beginning of each season.

Check all coverings for bolts and sharp edges twice monthly during usage season to be certain they are in place. Replace when necessary. It is especially important to do this at the beginning of each new season.

Check swing seats, ropes, cables and chains monthly during usage season for evidence of deterioration. Contact customer service for replacement parts.

Oil all metallic moving parts monthly during the usage period.

Take plastic swing seats indoors or do not use when the temperature drops below 40oF (5oC).

Sand rusted areas on tubular members and repaint using a nonlead-based paint meeting the requirements of Title 16 CFR Part 1303.

If the warning sticker is illegible, destroyed, or removed contact the Customer Service Department at
1-800-225-3865 for a replacement.